Description
LR102237 Rear Handbrake Motor (2-Pin) for Range Rover L405 and L494 (2016 →)
Part number: LR102237
Type: Rear electric parking brake motor
Connector: 2-pin
Fitment: Same motor for both left and right rear calipers
This is the later type electric handbrake motor used on Range Rover L405 and Range Rover Sport L494 models from the 2016 model year onwards. Earlier vehicles use a three-pin version, so you must check the connector on your existing motor before ordering. If your vehicle has the two-pin plug, this is the correct replacement.
The LR102237 unit bolts directly to the rear brake caliper and replaces the original parking brake actuator when it fails, often due to water ingress or internal gear wear. The same motor is fitted to both sides.
Compatibility
- Range Rover L405 (2016 →, with 2-pin EPB motor)
- Range Rover Sport L494 (2016 →, with 2-pin EPB motor)
Common symptoms of failure
- The electric handbrake will not release
- Parking brake fault message on the dashboard
- Motor seized or noisy in operation
- One rear wheel locked on
Watch Our How-To Video
Our video below shows you both types of motor and how to ensure you buy the right one. We also show you how to fit it. It’s a simple DIY job for anyone with basic practical skills.
Notes
- This listing is for the two-pin handbrake motor. If your existing unit has a three-pin connector, you need the other version.
- This part is a non-genuine compatible spare part, and the manufacturers’ names and part numbers have been used for reference purposes only.
- Free UK delivery with Royal Mail Tracked 48.
